Filter
Top Products
55 - C130n User’s Guide
" Dusty
" Wet (or damp)
Note Keep media between 15% and 85% relative humidity. Toner does
not adhere well to moist or wet paper.
" Layered
" Adhesive
" Folded, creased, curled, embossed, warped, or wrinkled
" Perforated, three-hole punched, or torn
" Too slick, too coarse, or too textured
" Different in texture (roughness) on the front and back
" Too thin or too thick
" Stuck together with static electricity
" Composed of foil or gilt; too luminous
" Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])
" Irregularly shaped (not rectangular or not cut at right angles)
" Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
" Acidic
" Any other media that is not approved
Thick Stock
Paper thicker than 90 g/m
2
(24 lb bond) is referred to as thick stock. Test all
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
DO NOT use thick stock that is
" Mixed with any other media in Tray 1 (as this will cause printer
misfeeding)
Capacity Tray 1 Up to 50 thick stock sheets, depending on
their thickness
Tray 2 Not supported
Orientation Face up
Driver
Media Type
Thick 1 (91 to163 g/m
2
)
Thick 2 (164 to 209 g/m
2
)
Weight 91 to 209 g/m² (25 to 55.9 lb)
Duplexing Not supported