Filter
Top Products
C5300 Menu Functions • 212
System Adjust Menu
Note: Factory default settings are shown in bold.
Item Settings Explanation
X ADJUST -2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
Adjusts overall print position
horizontally in 0.25
increments.
Y ADJUST -2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
Adjusts overall print position
vertically in 0.25 increments.
DUPLEX X ADJUST -2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
Adjusts overall print position
of print face horizontally in
0.25 increments.
DUPLEX Y ADJUST -2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
Adjusts overall print position
of print face vertically in 0.25
increments.
PCL TRAY2 ID# 1 to 59
Default = 20
Appears only if the optional
Second Paper Tray (see
“Second Paper Tray” on
page 248) is installed.
Sets Tray 2 number for the
PCL emulation.
PCL MP TRAY ID# 1 to59;
Default = 4
Sets MP tray number for PCL
emulation.
DRUM CLEANING OFF
ON
If you are experiencing
horizontal white lines on your
printed pages, enter the menu
and temporarily change this
setting to ON, then send a
one page print job. This will
cause an extra blank sheet to
print, cleaning the drum prior
to printing.
Careful! Leaving this set to
ON will reduce the image
drum life.