Filter
Top Products
English
Chapter 1 - Printer Setup 11
Switching off
Note 1:
Never turn the printer off while it is printing.
Note 2:
If the optional hard disk has been fitted, The
following procedure MUST BE followed before
turning off to protect any data that is stored on
the hard disk.
Note 3:
It is recommended to follow this shutdown
procedure each time the printer is switched off
for any reason.
1. Press
Menu (0)
button until the SHUTDOWN
MENU is displayed, then press
Select (3)
button.
2. Press
Select (3)
button again to EXECUTE the
shutdown sequence.
3. When PLEASE POWER OFF SHUTDOWN
COMPLETED is displayed on the LCD, turn the
printer off using the power switch.
Menu settings
Changing display language
Carry out the following to change the language that is
displayed on the printer’s LCD.
1. Press
Menu (0)
button until SYSTEM CONFIG
MENU is displayed, then press
Select (3)
button.
2. Press
Item (1)
until LANGUAGE is displayed.
3. Press
Value (2)
until the required language is
displayed.
4. Press
Select (3)
button. An asterisk (*) appears
next to the selected language.
5. Press
Online (4)
button when finished setting the
display language.
9000GBS.book Page 11 Wednesday, December 6, 2000 10:07 AM