Oki C9000 Series Printer User Manual


 
vi OKI C9000 Series
The power outlet into which the printer is
connected must remain accessible at all times.
Opening any cover may expose hot surfaces.
These are clearly labelled. Do NOT touch them.
Do not insert anything into the ventilation slots
on the printer; you could get a shock or cause a
fire.
Aside from the routine maintenance described in
this user’s guide, do not try to service the printer
yourself. Opening a cover may expose you to
shocks or other hazards.
Do not make any adjustments other than those
outlined in this users guide as damaged may be
caused to the printer.
If anything happens that indicates that the printer is not
working properly or has been damaged, disconnect the
printer from the power source and contact your dealer.
These are some of the things to look for:
The power cable or plug is frayed or damaged.
Liquid has been spilled into the printer, or it has
been exposed to water.
The printer has been dropped, or the cabinet is
damaged.
The printer does not function normally when
following the operating instructions.
Toner cartridge and image drum
handling
Leave unused toner cartridges and image drum
units in their packages until needed. When
replacing a toner cartridge or image unit, reuse
the packaging to dispose of the old toner cartridge
or image drum unit.
Do not expose the toner cartridges and image
drum units to light for more than five minutes.
Never expose the green drum (inside the image
drum unit) to direct sunlight.
Always hold the image drum unit by the ends -
never by the middle. Never touch the green drum
inside the image drum unit.
To avoid damage to the image drum unit, always
use original toner cartridges.
Exercise care when removing the toner cartridge.
Do not let it touch your clothing or porous
materials. The toner powder causes permanent
stains.
9000GBS.book Page vi Wednesday, December 6, 2000 10:07 AM