Filter
Top Products
14 OKI C9000 Series
Parallel interface
Note 1:
Printer drivers are not supplied for MS-DOS or
Windows NT 3.51 operating systems.
Note 2:
Printer drivers are not provided for Windows
NT4.0 operating system installed on a computer
with an ARC compatible RISC based processor
(MIPS R series, Alpha, Power PC etc.).
Note 3:
Parallel interface cable is not included. The
parallel interface cable must be bi-directional
and to standard IEEE 1284-1994.
Connection
1. Switch off the power to the printer and computer.
2. Connect the parallel interface cable to the printer
parallel interface connector and secure with
spring clips.
3. Connect the parallel interface cable to the parallel
port on the computer and secure with screws.
4. Switch on the printer and then switch on the
computer.
Plug and play configuration
Windows 2000
Note:
Administrator’s authority is required when
installing under Windows 2000.
9000GBS.book Page 14 Wednesday, December 6, 2000 10:07 AM