Filter
Top Products
English
Chapter 2 - Windows Setup 17
2. Choose [Search for the best driver for your device
(Recommended)] and click on [Next].
3. Insert the printer software CD-ROM into the CD-
ROM drive.
4. Uncheck [Floppy disk drive] and check [CD-
ROM drive], then click on [Next] to install by
default the PCL printer driver.
OR
For Windows 98 - To install another printer
driver, uncheck both [Floppy disk drive] and [CD-
ROM drive] and check [Specify a location]. Enter
D:\DRIVERS\W9598\
Language
(where D:\ is the
drive letter of the CD-ROM), then click on [Next]
selecting the required printer driver.
OR
For Windows ME - Select the required driver from
the displayed list in order to install the language
required.
5. Confirm the printer name and specify if the
printer is to be the default printer or not, then
click on [Next].
6. Specify if a test page is to be printed or not, then
click on [Finish].
7. When the printer icon appears in the Printer
folder, configuration is complete.
8. If the [Insert Disk] window is diplayed:
(a) Insert the printer software CD-ROM into the
CD-ROM drive and click on [OK].
9000GBS.book Page 17 Wednesday, December 6, 2000 10:07 AM