Filter
Top Products
English
Chapter 2 - Windows Setup 29
Plug and play configuration
Windows 2000
Note:
Administrator’s authority is required when
installing under Windows 2000.
1. When the [Found New Hardware Wizard]
appears, click on [Next].
2. Select [Search for the best driver for my device
(Recommended)] and click on [Next].
3. Choose [Specify a location] and click on [Next].
4. Insert the printer software CD-ROM disk into the
CD-ROM drive.
5. Uncheck [Floppy disk drive] and check [CD-
ROM drive], then click on [Next] to install by
default the PCL printer driver.
9000GBS.book Page 29 Wednesday, December 6, 2000 10:07 AM