Filter
Top Products
English
Chapter 4 - Administrating Network Printers 49
Queue Server Mode
Print Server Name: Set the name of the print server.
Polling rate: Specify an inquiry interval on if there is
a print queue in the file server.
Queue Server Mode (bindery)
File Server Name: Specify the file server to which the
print server will be connected.
Queue Server Mode (NDS)
NDS Tree Name: Specify the tree name to which the
print server will be connected.
NDS Context Name: Specify the context name to
which the print server will be connected.
Remote Printer Mode
Printer Name: Set the name of the printer to be
connected to the print server.
Print Server Name: Specify the print server to
connect.
Setting procedure
The following setting procedure is explained using an
example in which both the Queue Server and the
Remote Printer in AUTO Mode are set using the setting
values as shown below:
Item Setting value
File server name nwserver
Print server namepserver14i
NDS Tree name NPRINTER
NDS Context nameOU=DESIGN.OU=MFG.
O=ACME
Printer name op14i
Polling rate 10sec
1. Confirm the current settings.
OkiPage> show protocol
<<Protocol Status>>
NetWare Q-Server Mode (bindery) Status - - ‘1’
NetWare Q-Server Mode (NDS) Status - - ‘2’
NetWare R-Printer Mode Status - - ‘3’
EtherTalk Status - - ‘4’
EXIT --‘0’
Select the mode which you want to confirm using
the number and press the Enter key. Then the
current settings are displayed.
2. Change the setting.
OkiPage> set protocol [Enter]
<<Protocol setting>>
<Select Protocol>
TCP/IP=1 NetWare=2 EtherTalk=3 EXIT=0:2 [Enter]
<<Protocol Setting>>
<Select Protocol>
TCP/IP=1 NetWare=2 EtherTalk=3 EXIT=0: 2 [Enter]
Will you use NetWare? (y/n): y [Enter]
Enter “y” to set up the NetWare
3100euGB.book Page 49 Friday, March 16, 2001 1:18 PM