84 OkiLAN 320e Network Card
Is printer server’s usable frame type 802.2 or 802.3
NO
YES
Set print server’s frame type to 802.2 or 802.3
Is operation panel frame type Auto or does it match NetWare rout
e
print server
NO
YES
Set operation panel frame type to Auto or match
with router or print server. Must match with actu
a
communication exchanges that are made.
Has print server started? See NetWare manual.
NO
YES
Start print server. See NetWare manual.
Are file server settings correct? Use OkiView (Oki Uty), NWADMI
N
(Novell UTY) or PCONSOLE (Novell UTY) file server name - que
u
name -print server name -printer name linkmade? Matchwithset
t
contents of printer side?
NO
YES
Set file server correctly. NOTE: If NWADMIN is
used, advertising name must match print server
name.IfPCONSOLEisused,queue/printserverl
must be done from both.
Is there excessive traffic or an abnormality occurred on the netwo
r
YES
NO
Find the source of the problem and return the
network to a normal state.
Are other R-Printers connected to printer name set in both file ser
v
and printer
YES
NO
Kill that connection or make new settings for the
printer.
Used in NetWare/IP environment that have been capsulated by I
P
YES
NO
Does not support packets capsulated by IP. refe
NetWare/IP manual.
Refer to Common Troubleshooting above.
END
3100euGB.book Page 84 Friday, March 16, 2001 1:18 PM