Filter
Top Products
English
Chapter 6 - Troubleshooting 85
Cannot connect in Q-Server Mode.
Is Level 2 menu NetWare set to Enable
NO
YES
Set Level 2 menu NetWare to Enable.
Is NetWare mode set to Auto or Q-Server
NO
YES
Set NetWare mode to Auto or Q-Server.
Does NetWare router exist between file server and printer?
YES
NO
NO
YES
Set NetWare routerframe type to 802.
802.3
Is file server’s usable frame type 802.2 or 802.3?
NO
YES
Set file server’s frame type to 802.2 or 802.3.
Is operation panel frame type set to Auto or does it match NetWa
r
router/file server?
NO
YES
Set operation panel menu frame type to Auto or
match it with router or file server. This must mat
c
others where actual communication exchanges
made.
Is password set for print server?
YES
NO
Do not set password.
Are file server settings correct? Use OkiView (Oki Uty), NWADMI
N
(Novell UTY) or PCONSOLE (Novell UTY) file server name - que
u
name -print server name -printer namelink made? Matchwith set
t
contents of printer side?
NO
YES
Set file server correctly.
3100euGB.book Page 85 Friday, March 16, 2001 1:18 PM