Filter
Top Products
English
Chapter 4 - Administrating Network Printers 57
4. Select the [NetWare] tab and click on [Operating
Mode] from the left column. Set the print server
operating mode from the given options on the
right.
5. If you are running a NetWare 4.x network, click
on [NetWare Directory Services] from the left
column. Select [NDS Tree Name] from the
pulldown menu and enter the [Print Server
Context].
6. Click on [Queues] from the left column to bring
up the [Queues] screen and then click on
[Change].
7. Select the desired queues from the list of
[Available Queues] to be added into services.
Click on [Service] to move the selection to the
[Serviced Queues] column. When all queues have
been added, click OK.
8. Clickon[OK]againtoreturntothemainscreen.
Setting TCP/IP environment
1. From the main JetAdmin screen, select the
Okipage 14i you want to configure.
2. Select [Modify] from the [Device] menu.
3. in the [Configuration] screen, select the [General]
tab and enter the print server name and
description.
4. Select the [TCP/IP] tab and set the print server IP
configuration.
Setting AppleTalk environment
1. From the main JetAdmin screen, select the
Okipage 14i you want to configure.
2. Select [Modify] from the [Device] menu.
3. Under the [Optiona]l tab, select [Mac].
4. Enter the AppleTalk name and click on [OK].
Obtaining diagnostic information
1. From the main JetAdmin screen, select the
Okipage 14i you want to view diagnostic
information on.
2. Select [Properties] from the [Device] menu.
3. From the [Properties] screen, select the
appropriate tab to view the desired diagnostic
information.
3100euGB.book Page 57 Friday, March 16, 2001 1:18 PM