Filter
Top Products
SADDLE STITCH FINISHER
3-15
3
*1 Multiple punch modules cannot be installed together. Some models may not be available in some regions.
*2 With PN1B, two or three holes can be punched depending on the paper size.
*3 With PN1C and PN1D, the number of holes is the same. The hole interval, however, is not the same.
Specifications are subject to change for improvement without notice.
Supplies
SC2 staple cartridges must be used for this finisher. The cartridge package
contains three cartridges approx. 5000 staples each.
Saddle stitch finisher functions
■ Sort mode
Sorted sets will be delivered.
■ Offset mode
■ Group mode
Groups of copies of the same page will be
delivered.
Sets will move from side to side so that each set or
group will be offset from the previous set or group
for easy separation. The offset function can only be
used in the offset tray.
Stapled sets will not be offset.
Stapling capacity
A4 or 8-1/2" x 11" or smaller size: 50 sheets*(80 g/m
2
or 20 lbs.)
B4 or 8-1/2" x 14" or larger size: 25 sheets*(80 g/m
2
or 20 lbs.)
*Up to two sheets of 128 g/m
2
or 34 lbs. paper can be included as covers.
Staples
Upper tray: Single staple can be placed in the top left or lower left corners or two
staples can be centred on the left side.
Lower tray: 120 mm (4-47/64") pitch from the centre of paper
Power supply Supplied from machine
Dimensions
753 mm* (W) x 603 mm (D) x 953 mm (H) (29-41/64"* (W) x 23-3/4" (D) x 37-33/64" (H))
*When the top tray is extended.
Weight Approx. 39 kg (86 lbs.)
Name Punch module
Model*
1
AR-PN1A AR-PN1B*
2
AR-PN1C*
3
AR-PN1D*
3
Number of holes 2 3 or 2 4 4
Paper sizes for hole
punching
A3, B4, A4, A4R, B5,
B5R, 11"x17",
8-1/2"x14", 8-1/2"x11",
8-1/2"x11"R
3 holes: A3, A4,
11" x 17", 8-1/2" x 11",
2 holes: 8-1/2"x14",
8-1/2" x 11"R
A3, A4
A3, B4, A4, A4R, B5,
B5R, 11"x17",
8-1/2"x14", 8-1/2"x11",
8-1/2"x11"R,
PrintoutsOriginal
Offset mode Non-offset mode
PrintoutsOriginal