Filter
Top Products
4.3.6 Controller Setup (continued)
Below are the definitions of terms used in the Controller Setup page.
A) Setup:
Clicking on the options shown, allows user to modify the different parameters
shown under this menu (see Section 4.3.7. Setup Page for more details)
B) Monitor:
Scrolling: If checked, the Meter will display data from all the End Devices.
Otherwise, it only displays data from the End Device specified on Device ID.
End Device ID: Address/ID of the End Device that will be display on the Meter.
C) Transmit Power:
Channel 12: The Receiver communicates in a fixed channel. Operation channel
#12 defined in IEEE 802.15.4 for the sensor network.
Transmit Power Range: This determines the signal power transmitted by the
Receiver. The options are 10dBm and 20dBm.
D) Miscellaneous:
PID 13106 (version): The Personal Network ID is fixed to 13106. In parenthesis
is the firmware version of the radio module, also shown on model/serial label.
iSeries Version: The firmware version of the Meter.
38