Filter
Top Products
4.3.7.6.1 Display Color Examples
Press
1) Display flashes previous selection for “Alarm 2 Color Display”.
Press 2) Scroll through the available selections:
GGRRNN
,
RREE
dd
or
AAMM
BB
RR
.
Press
3) Display shows
SS
tt
RR
dd
stored message momentarily and then
momentarily shows the software version number, followed by
RRSS
tt
Reset, and then proceeds to the Run Mode.
Example 1:
Output 1 & Output 2
= SSR
Alarm Setup
: Absolute, Above, Alarm 2 HI Value “ALR.H” = 200,
Alarm 1 HI Value “ALR.H” = 400
"Color Display" Setup
: Normal Color “N.CLR” = Green,
Alarm 1 Color “1.CLR” = Amber, Alarm 2 Color “2.CLR” = Red
Display Colors change sequences:
GREEN RED AMBER
•
--
➤
------------------------------
•
-----------------------------
•
------------------------------
➤
0 AL2.H = 200 AL1.H = 400
Example 2:
Output 1 & Output 2
= Pulse
Alarm Setup
: Absolute, Below, Alarm 2 Low Value “ALR.L” = 300,
Alarm 1 Low Value “ALR.L” = 100
Color Display Setup
: "N.CLR" = Green, "1.CLR" = Amber, "2.CLR" = Red
Display Colors change sequences:
AMBER RED GREEN
•
--------------
•
----------------------------------
•
------------------------------------------- --
•
0 AL1.L = 100 AL2.L = 300
For complete Front Panel Pushbutton procedures, refer to the
Supplemental Guide.
49
➤ ➤