Filter
Top Products
4.3.7.6.1 Display Color Examples (continued)
Example 3:
Output 1
= Analog Output (Alarm 1 disabled), Setpoint 1 = 300,
Output 2
= Relay, Setpoint 2 = 200
Alarm 1 & 2 Setup
: Deviation, Band, “ALR.H” = 10
Color Display Setup: “N.CLR” = Green, “1.CLR” = Amber, “2.CLR” = Red
Display Colors change sequences:
RED RED RED GREEN RED
•➤
---------------
•
------
•
------
•
--------------------------------
•
------
•
-------
•
----------------
➤
0 190 200 210 290 300 310
Alarm 1 is designed to monitor the Input Value around the Setpoint 1.
Alarm 2 is designed to monitor the Input Value around the Setpoint 2.
Example 4:
Output 1
= Relay, Setpoint 1 = 200
Output 2
= Relay, Setpoint 2 = 200
Alarm 1 Setup
: Deviation, Band, “ALR.H” = 20
Alarm 2 Setup
: Deviation, Hi/Low, “ALR.H” = 10, “ALR.L” = 5
Color Display Setup
: “N.CLR” = Green, “1.CLR” = Amber, “2.CLR” = Red
Display colors change sequences:
AMBER RED GREEN GREEN RED AMBER
•
--
➤
---------------
•
----------------
•
-------------
•
--------------
•
-------------
•
---------------------
➤
0 180 195 200 210 220
Reset: The Meter automatically resets after the last menu of the
Configuration Mode has been entered. After the Meter resets, it
advances to the Run Mode.
For complete Front Panel Pushbutton procedures, refer to the
Supplemental Guide.
50