Omega DAQP-208 Network Card User Manual


 
2.1.2 Windows 98
1. Insert the DAQP card into any available PC Card socket. The first time a new PC
Card type is installed the “Add New Hardware Wizardwindow will open. Click
Next to continue.
2. The Add New Hardware Wizard provides several options to configure the DAQP
card. Select the recommended option radio button: “Search for the best driver for
your device”. Click Next to continue.
3. An Install from Disk dialog box will open. Insert the DaqSuite CD, either type in or
browse for the correct CD-ROM drive letter and then click OK. Windows 98 will
browse the CD until it finds the file x:\daqpcard.inf“, where “x” is the CD-ROM
drive letter. Click Next to continue.
4. When Windows finishes the configuration process, click Finish to exit the New
Hardware Found Wizard.
5. Hardware configuration is not complete until the user has run the desired driver
support installation from the DaqSuite CD demo. This support installation is
required to install Windows 98 drivers for your DAQP card. Refer to Section 2.3:
Data Acquisition Software and Drivers for a list of driver installation options.
2.1.3 Windows 95
1. Insert the DAQP card into any available PC Card socket. The first time a new PC
Card type is installed the “New Hardware Foundwindow will open. Select the
“Driver from disk provided by hardware manufacturer” radio button and click OK
to continue.
2. An Install from Disk dialog box will open. Insert the DaqSuite CD, either type in or
browse for the correct CD-ROM drive letter and then click OK. Windows 95 will
browse the CD until it finds the file x:\daqpcard.inf“, where “x” is the CD-ROM
drive letter and then proceed to configure the hardware.
3. Hardware configuration is not complete until the user has run the desired driver
support installation from the DaqSuite CD demo. This support installation is
required to install Windows 95 drivers for your DAQP card. Refer to Section 2.3:
Data Acquisition Software and Drivers for a list of driver installation options.
DAQP-208/208H/308 Users Manual 11