Filter
Top Products
23
L
L
e
e
d
d
s
s
POWER
On, if the printer is powered on.
LQ
On, if the Letter Quality mode is selected.
P1, P2,
P3, P4
Indicate the currently select
ed configuration both in normal printing mode and
during the Printer Setup procedure. See “ Printer Setup ” later in this section.
If the INTERFACE TYPE function is set to auto+blink
, when line 1 (parallel
interface) is selected for data transmission, the P1 indicator blinks.
If the
INTERFACE TYPE
function is set to
auto+blink
, when line 2 (serial interface)
is selected for data transmission, the P2 indicator blinks.
In case of fault condition P1, P2, P3 and P4 blink.
ON LINE
On, if the printer is online.
Off, if the printer is offline.
Blinks, when receiving printing data from host.
In case of a printer fault during the initialization of the
LQ
,
P1
,
P2
,
P3
,
P4
and
ON LINE
indicators blink continuously. Turn the printer off and on again. If the problem is not solved,
call Technical Support .