Filter
Top Products
38
handling is faster.
Setup Parameter Values Description
AUTO GAP OFFSET -0,075 mm, -0.050 mm,
-0.025 mm,
+0.000 mm, +0.025
mm, +0.050 mm,
+0.075 mm, +0.100
mm
Sets the automatic gap offset to one of the given values.
GET EDGE QUOTE
0/2”, 1/2”, 2/2”, 3/2”,
4/2”, 5/2”, 6/2”, 7/2”
Sets the position in which the left paper edge is checked. If
set to 0, the check is performed at the first line. The other
values correspond to the physical distance from the first line.
SKIP
PERFORATION
disabled, enabled If the passage of the paper perforation under the print head is
critical, select
enabled
to avoid the paper being torn. The
print head lifts up during the paper passage. If disabled, the
print head stays in position.
TEAR ADJUST -0,85 mm, -0,56 mm, -
0,28 mm, +0,00 mm,
+,28 mm +0,56 mm,
+0,85 mm
Sets the paper tear-off position by aligning the paper with the
tear-off edge .