Filter
Top Products
57
P
P
a
a
p
p
e
e
r
r
S
S
p
p
e
e
c
c
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
The documents must all conform to the following characteristics:
• Use paper matching the indicated characteristics.
• They must have well defined top and left edges, with a square angle tolerance of 0.1° on all
edges.
• The paper must not have holes, perforations, folds or tears anywhere within the print area of the
document.
• The radius on a corner of the form must be within 9.5 mm from the left or right edge.
• The form to be printed must not contain foreign material.
• Form opacity must be at least 75%. Forms with a lower opacity may cause feed errors.
• Never print on documents with metallic or hard plastic fasteners or staples, they may damage
the printer.
• To get the maximum print contrast you should print on white or light colored paper. You may
overstrike to improve the low contrasting paper.
• It is preferable to use single and multiple documents with the fibre running in the insertion
direction of the printing unit.
• Recycled paper is permitted on principle.
• It is preferable to print on multiple forms with a narrow glue strip or top-gluing. The gluing
must not cause waving in the set of forms.