Filter
Top Products
45
without (no).
Setup Parameter Values Description
PRINT DIRECTION unidir., bidir.,
sw control
Selects the printing direction of the print head: unidirectional
(
unidir
.), bidirectional (
bidir
.) or selected via software (
sw
control
).
EJECT ON FF no, yes Performs a form feed according to the selected page format (
no
) or
ejects a cut sheet loaded into the printer (
yes
).
CUT SHEET EJECT on front, on rear Selects whether the cut sheet loaded into the printer is ejected
towards the front or the rear of the printer. The selection of the paper
ejection towards the rear of the printer should be selected only for
paper with a length of at least 14 cm (5,5 inch).
PARK MODE
immediate
manual imm.
When pressing the PARK key or receiving a park command, the
printer immediately parks the paper.
When pressing the PARK key, the printer automatically parks the
paper. When receiving a park command via software:
1. If the current page is not empty (there is printing data or paper
movement commands have been issued), a form feed is
performed.
2. The paper is moved to the tear-off position.
3. The P1, P2, P3 and P4 leds blink.
When the ON LINE key is pressed the printer parks the paper.
after tear When pressing the PARK key or receiving a park command via
software:
1. If the current page is not empty (there is printable data or paper
movement commands have been issued), a form feed is