Filter
Top Products
27
5. To change the values of the serial interface parameters, fill in the marker ( ) beside the value
you want to set with a black or blue ball-point pen or a fiber-pen.
Do not use pencils.
WORD LENGTH( )( )
disabled *enabled
BAUD RATE( )( )
disabled *enabled
PARITY BIT( )( )( )
DTRXON/XOFF*XON/XOFF + DTR
If more than one value is set for a parameter, the printer ignores these parameters and
maintains the currently set value.
Do not fill in the marker beside the title of the preprinted form, otherwise the printer will not be
able to read that page.
6. Once the serial interface parameters have been assigned, insert the sheet back into the printer.
7. The printer reads the selected values on the configuration sheet and sets them. The settings
are confirmed by a # symbol printed on the left of the corresponding marker.
The printer then returns to normal functioning mode.
For a complete description of the printer setup procedure see the paragraph “Printer Setup”
later in this manual.