Filter
Top Products
47
Setup Parameter Values Description
TEAR MODE auto 1s, auto 2s,
auto 3s, auto 4s,
auto 5s, manual,
no tear/reverse
Selects the way the tear mode is performed. Selecting
auto 1s,
auto 2s, auto 3s, auto 4s,
or
auto 5s
, the printer
moves the paper in the tear-off position and back to the printing
position after the corresponding number of seconds. Selecting
manual, the tear-off is performed manually, by pressing the ON
LINE key. Selecting
no tear/ reverse
, the printer does not
perform the tear-off function (this is useful, when printing on labels).
MANUAL LOADING enabled, disabled Selects the manual loading mode. Setting it to
enabled
the printer
loads any kind of document according to the described
procedures. Select
disabled
, when a more precise paper
alignment is necessary. With this selection it is not possible to load
documents with a width of less than 90 mm.
ALIGN MODE fast, normal Selects the paper alignment mode. Selecting fast the printer
performs less checks on the alignment, whereas, if you need a
particularly precise alignment of the documents, select
normal
.
GAP MODE
auto, fix Selects, whether the print gap is sensed for each inserted sheet
(
auto
) or only for the first sheet after the printer power on (
fix
).
The print gap is sensed separately for the cut sheet and the fanfold
paper.
AUTO
EMPHASIZED
no autoEM, 0.25
mm, 0.35 mm,
0.45 mm, 0.55 mm
Selects the emphasized print mode when the loaded paper is
thicker than the selected value.