Filter
Top Products
14
Getting To Know Your Machine
INV
INV
LTR
LGL
LDR
LTR
LDR
INV
LTR
LGL
INV
LTR
INV
INV-R
LTR-R
LGL
LDR
Width Guides
Face Down
Until it stops
Upper Limit Guides
Until it stops
Sheet Bypass
PUSH
Paper Tray
Max Level
Indicator
Paper Tray
∗∗
∗∗
∗ Hold the guides by the center when
adjusting the width
Operation Chart
If set to other
function mode
(DP-8020E/8020P
only)
Face Up
A
B
C
From
ADF/i-ADF
(Option)
From
Platen
Face Down
● If the original is not positioned
properly, a portion of the original
may not be copied.
● For originals smaller than Invoice
size, position the original within
the Invoice area and select
Invoice.
or
● Adding Paper (Paper Tray)
The following steps are for Paper Tray-1, use the same procedures for other optional Paper Trays.
● Adding Paper (Sheet Bypass)
Copying on Special Paper, etc.
Load Paper: Face Up
Paper Weight: 16 - 24 lb (60 - 90 g/m
2
)
Paper Capacity: 550 Sheets (20 lb (80 g/m
2
))
Adjust the width guides.
Incorrect adjustment may cause the
paper to wrinkle, misfed, or skew.
Original Guides
■ Quick Operation Chart
NOTE:
To change the paper size, refer to
page 62.
1
1
2
3
Adding Paper
Turn the Power
Switch to the
ON position
Original Guides
∗∗
∗∗
∗
Adjust to the
original's width
Tray
(Max. 50 Letter
size originals)
INV: Invoice, LTR: Letter
LGL: Legal, LDR: Ledger
4
4
Load Paper
(Do not exceed limit guides)
Paper Weight: 15-34 lb (55 - 133 g/m
2
)
Paper Capacity: 50 sheets/20 lb (80 g/m
2
)
To add paper to the Sheet Bypass,
remove the leftover paper from the
tray, and align it with the additional
paper, then load them together onto
the tray.
NOTE:
Load the paper properly, and ensure
that it does not exceed the Max. Level
indicator.
2
1
2
3
(ON)
(OFF)