Filter
Top Products
76
Network Scanner
■ Direct Connection (with Crossover Cable)
Direct Connection (with Crossover Cable)
Turn OFF
∗
the Power
Switch (Machine and the
PC).
Connect a Crossover LAN Cable between your machine
and the PC.
LAN Cable (Crossover)
To PC
(Right Side of Machine) (Rear Side of PC)
NOTE: Do not use Standard
LAN Cable.
Turn OFF
∗
and ON the
Power Switch (Machine
and the PC).
Input your PC's IP
Address into the Address
Book in the machine (see
page 72) or into the
Panasonic Document
Management System
software (refer to the
enclosed CD).
Scan the document(s) to
your PC. (See page 70)
NOTE:
∗
If the Hard Disk Drive Unit (DA-HD18) is installed, see page 13.
LAN Cable
(Crossover)
To Machine
1
2
7
6
5