Filter
Top Products
23
Before Starting
ContentsIcon ContentsIconNo. No.
17 18
19
20
21 22
23
24
25
28
26
27
18 19 20 21 22
23
24252627
PAPER TRAY Key
Selects the paper tray.
Warning Indications
When unit is used as a
photocopier.
: Add Paper (See page 14)
: Replace Toner Bottle
(See page 16)
: Remove misfed paper
(See pages 16-21)
: Call Service
Cursor Key
To select the zoom
ratio, etc.
(For DP-8016P)
Keypad
Sets copy quantities, etc.
RESET Key
Resets all features to the initial
power-on state of the active function.
START Key
Starts the jobs.
(Copy, Scan, etc.)
SET Key
Sets the parameter(s) of Function
settings.
CLEAR Key
Clears the copy quantities, etc.
FUNCTION Key
Used for changing the paper size,
initial function values (default
values) and key operator settings.
ALARM LED (RED)
Lights/Flashes when trouble
occurs.
ACTIVE LED (GREEN)
Flashes when machine is in
operation.
Lights:
When the machine stops due to the following
condition(s):
● No paper in the selected tray or toner has run
out.
● Paper has misfed, etc.
Flashes:
When the machine alerts of the following
condition(s):
● No paper in the Tray. (Tray not selected)
● Toner is getting low, etc.
STOP Key
Stops the jobs.
(Copy, Scan, etc.)
29
Sets scanning resolution.
(See page 70)
∗
Used for Fax, Internet Fax, and
Email Functions.
(except for the ABBR Key, see
page 50.)
NOTE:
To adjust the brightness of the LCD display, press and while holding down the CLEAR Key, keep pressing the
ORIGINAL SIZE or COPY SIZE Key until the desired brightness is achieved.
ORIGINAL SIZE : Dimmer
COPY SIZE : Brighter