Filter
Top Products
46
Making Copies
Other Features
■ Job Build and SADF Mode
Special originals (like thin paper, etc.) can be
fed from the ADF Tray and copied continuously
using the Job Build and SADF Mode.
NOTE: Set the Copier Settings, Parameter No.
12 (SADF DEFAULT) to “OFF” position
in advance. (See page 59)
Thin paper: minimum 15 lb (55 g/m
2
)
2
1
For ADF
For i-ADF
Select desired
settings
Example: To make 5 sets of sorted copies of
80 sheets of originals. (Letter size)
1
For ADF
For i-ADF
Place the first 50
sheets of originals
on the ADF Tray.
50
80
1
51
80
1
Originals: 50 sheets
<1st scan>
Originals: Remaining
30 sheets <2nd scan>
1
st
and 2
nd
Scanned Data
are combined into one job.
5 sets of 80 sheets
sorted copies are
printed
NOTE
● Job Build and SADF function cannot be combined with 2 1 and 2 2.
● Concurrent Copying function cannot be used when the Job Build and SADF function are set to
the “ON” position in the Copier Settings, Parameter No. 12 (SADF DEFAULT). (See page 59)
■ Concurrent Copying
The next copy job can be reserved even if the
current copy job is not completed.
(Requires the optional Hard Disk Drive and
Image Memory (See page 69) to be installed)
1
For ADF
For i-ADF
1st job
1st job
2nd job
Reserve
Copy
2nd job
or
2
Select desired
settings
2
Select desired
settings