Filter
Top Products
9
Getting To Know
Your Machine
Installation and Relocation Cautions
Do not place the machine near heaters or volatile, flammable, or combustible materials such as
curtains that may catch fire.
Do not place the machine in a hot, humid, dusty or poorly ventilated environment. Prolonged
exposure to these adverse conditions can cause fire or electric shocks.
Place the machine on a level and sturdy surface that can withstand a weight of 95 lb (43.3 kg)
(DP-8020E) / 93 lb (42.3 kg) (DP-8020P/8016P). If tilted, the machine may tip-over and cause
injuries.
When relocating the machine, contact your authorized Panasonic dealer.
When moving the machine, be sure to unplug the power cord from the outlet. If the machine is
moved with the power cord attached, it can cause damage to the cord which could result in fire or
electric shock.
Operating Safeguards
Do not place a magnet near the safety switch of the machine. A magnet can activate the machine
accidentally, resulting in injuries.
Do not use a highly flammable spray or solvent near the machine. It can cause fire.
When copying a thick original, do not use excessive force to press it against the platen glass. The
glass may break and cause injuries.
Never touch a labelled area found on or near the heat roller. You can get burnt. If a sheet of paper
is wrapped around the heat roller, do not try to remove it yourself to avoid injuries or burns. Switch
Off the machine immediately, and contact your authorized Panasonic dealer.
Do not use conductive paper, e.x:. folding paper, carbonic paper and coated paper. When a misfed
paper jam occurs, they can cause a short-circuit and fire.
Do not place any heavy objects on the machine. An off-balance machine can tip-over or the heavy
object can fall, causing damage and/or injuries.
Keep the room ventilated when using the machine for an extended period of time to minimize the
ozone density in the air.
When copying with the platen cover open, do not look directly at the exposure lamp. Direct eye
exposure can cause eye fatigue or eye injury.
Pull out paper trays slowly to prevent injuries.
When removing misfed paper, make sure that no pieces of torn paper are left in the machine. A
piece of paper remaining in the machine can cause fire. If a sheet of paper is wrapped around the
heat roller, or when clearing a misfed paper that is difficult or impossible to see, do not try to
remove it by yourself. Doing so can cause injuries or burns. Switch Off the machine immediately,
and contact your authorized Panasonic dealer.
If accessing the inner components of the machine to clear misfed paper, etc., exercise care not to
touch heated areas, or you may get burned.
Others
■ When clearing a paper jam or other fault, follow the appropriate procedure given in the Operating Instructions.
CAUTION