Panasonic 8045 Fax Machine User Manual


 
9
Getting to Know
Your Machine
Getting to Know Your Machine
Connecting the Cable
ACTIVITY Lamp
Blinks when there is data traffic
on the LAN.
LINK Lamp
Illuminates when connected to the LAN.
Lamp will not turn ON if LAN cable is defective
(contains breaks).
LAN Connection Jack
(10Base-T/100Base-TX)
LAN Cable
(10Base-T/100Base-TX Cable)
Insert the plug until a click is heard.
(LAN cable is not included with the product.)
Purchase a Category 5 Cable, compliant with
EIA/TIA 568-A-5 standard.
10Base-T/100Base-TX Ethernet Hub
Ethernet LAN Cable
(10Base-T/100Base-TX)
(Not included)
Telephone Jack
Telephone Line Jack
Plug one end of the telephone line
cable into the telephone jack supplied
by the telephone company and the
other end into the LINE jack on the left
side of the machine.
(Refer to Setting the Dialling Method.
See page 160.)
External Telephone Jack
•You can connect an additional standard
single line telephone to the machine. To
connect the telephone, remove the
protective tab on the TEL jack.
Power Switch
After connecting all cables and the Power
Cord, turn the Main Power Switch on the
Back, and the Power Switch on the Left
Side of the machine to the ON position.
10/100BASE-
TX LINK
RX