Filter
Top Products
– 23 –
Checks before using an external VTR or microphone for
uploading
)
Has the RS-422A cable been connected properly between the system
and external VTR?
Refer to the operating instructions of each for details on the connection
methods.
)
Has the external VTR been set so that it can be operated by remote
control?
Refer to the operating instructions of the external VTR for details on the
setting method.
)
Is the correct device name displayed on the digitizer window of the
system and limited edition of the editing software program?
17. After the checks (only if necessary) for the uploading operation using the
external VTR have been completed error-free, click at the top right of
the digitizer window to close the window.
Do not exit the Toolbox since the limited edition of the editing software
program will be used in the next section as well.
<Check>