Filter
Top Products
– 43 –
¬
If the prompt to re-allocate the disk media appears during
the disk media check
¬
O
It means that there is a defect in the media.
(4) Formatting the disk
3. The window shown below now appears. Press the [
:
] or [
;
] arrow key to
highlight the SCSI device to be inspected, and press the [Enter] key.
(Press the [Esc] key to return to the previous menu.)
Note:
Basically, this operation need not be performed with this unit.
Carelessly and needlessly formatting the disk will destroy the data on
the drive.
Once formatting is started, it cannot be aborted.
1. Press the [
:
] or [
;
] arrow key to highlight the SCSI channel to be
checked, and press the [Enter] key to make the selection.
(Press the [Esc] key to return to the previous menu.)
2. The selection screen shown below now appears. Press the [
:
] or [
;
]
arrow key to highlight the [SCSI Disk Utilities] item, and press the [Enter]
key.
(Press the [Esc] key to return to the previous menu.)
Configure/View Host Adapter Settings
SCSI Disk Utilities
Options
SCSI ID #0 : No Device
SCSI ID #1 : IBM DDYS-T18350M
SCSI ID #2 : IBM DDYS-T18350M
SCSI ID #3 : No device
SCSI ID #4 : No device
SCSI ID #5 : No device
SCSI ID #6 : No device
SCSI ID #7 : Adaptec SCSI Card 39160
SCSI ID #8 : No device
SCSI ID #9 : No device
SCSI ID #10 : No device
SCSI ID #11 : No device
SCSI ID #12 : No device
SCSI ID #13 : No device
SCSI ID #14 : No device
SCSI ID #15 : No device
Select SCSI Disk and press <Enter>
The figure on the left
shows the information for
channel A.
With channel B, IBM
DDYS-T18350M is
displayed for #0 as well.