Filter
Top Products
– 42 –
(3) Inspecting the disk media
1. Press the [
:
] or [
;
] arrow key to highlight the SCSI channel to be
checked, and press the [Enter] key to make the selection.
(Press the [Esc] key to return to the previous menu.)
2. The selection screen shown below now appears. Press the [
:
] or [
;
]
arrow key to highlight the [SCSI Disk Utilities] item, and press the [Enter]
key.
(Press the [Esc] key to return to the previous menu.)
3. The window shown below now appears. Press the [
:
] or [
;
] arrow key to
highlight the SCSI disk (ID #0 to 2) to be inspected, and press the [Enter]
key.
(Press the [Esc] key to return to the previous menu.)
4. The selection screen shown below now appears. Press the [
:
] or [
;
]
arrow key to highlight the [Verify Disk Media] item, and press the [Enter]
key.
(Press the [Esc] key to return to the previous menu.)
5. The [Verify Disk?] message now appears. Select [Yes] to start the disk
media check.
6. The progress made is indicated, and when the [Disk Verification Complete]
message is displayed, press the [Esc] key.
Format Disk
Verify Disk Media
Configure/View Host Adapter Settings
SCSI Disk Utilities
Options
SCSI ID #0 : No Device
SCSI ID #1 : IBM DDYS-T18350M
SCSI ID #2 : IBM DDYS-T18350M
SCSI ID #3 : No device
SCSI ID #4 : No device
SCSI ID #5 : No device
SCSI ID #6 : No device
SCSI ID #7 : Adaptec SCSI Card 39160
SCSI ID #8 : No device
SCSI ID #9 : No device
SCSI ID #10 : No device
SCSI ID #11 : No device
SCSI ID #12 : No device
SCSI ID #13 : No device
SCSI ID #14 : No device
SCSI ID #15 : No device
Select SCSI Disk and press <Enter>
The figure on the left
shows the information for
channel A.
With channel B, IBM
DDYS-T18350M is
displayed for #0 as well.