Filter
Top Products
16
Function to use
Supervisor Password
User Password
User Secuity lock
Security Measures
Situation
You do not want your computer to be used without permission
You want to prevent theft of your computer
To prevent unauthorized access of your computer, the various security measures are provided below.
You can set your "Supervisor Password" and "User Password" (The User Password
can only be set when the Supervisor Password has been set).
Without the password, access to your computer is impossible.
Starting up when the password is set
When you do not want your computer to be used without permission
* If you are starting from the suspend mode, if after
three attempts the correct password is not input,
or if no password is entered for about a minute,
the computer returns to the suspend mode.
If the correct password is input, Will Start
Will Not Start*
(Power off)
Upon entering your Supervisor
Password or User Password
and pressing Enter .
If entering the Setup Utility with Supervisor Password
You can register all items of the Setup Utility ( page 37).
If entering the Setup Utility with User Password
Over three incorrect attempts,
or no password is entered for about one minute,
(To next page)
You can not register [Advanced] menu and some items in [Security] menu.
When [User Password Protection] has been set to [Protected], you can not regis-
ter the User Password.
When [User Password Protection] has been set to [No Protection], you can regis-
ter the User Password ( page 40).
Reference
below
"Names and Functions of Parts"