Filter
Top Products
43
By making various settings in Smart Boot, it is possible to shorten the start-up time
from the computer OFF state, the go-into time to hibernation and the return-to-opera-
tion time from the hibernation mode.
Smart Boot
Select [Start] - [Programs] - [Panasonic] - [Smart Boot]
1
Add check mark depending on your needs
2
3
Click [Boot Detail] if necessary
4
Click [OK]
5
If this box is checked, the following occurs.
The Windows Logo display (i.e., the cloud
display) is not shown at start-up.
The channel bar of Internet Explorer 4.0 is
not shown.
No background paper is displayed.
“Welcome” of Internet Explorer 4.0 is not shown.
To display the start-up menu by pressing
the F8 key at start-up, it is necessary to
press F8 slightly faster than normal.
It is possible to make individual settings to
the Optimize Boot contents by adding checks
to the boxes shown.
When Desktop, MS-DOS setting, and File
System are checked, all of the items under
each of these are also checked.
<Desktop>
It is possible to choose whether or not to dis-
play the active desktop as a web page, chan-
nel bar, background paper, and the "Wel-
come" of Internet Explorer 4.0.
<MS-DOS Setting>
It is possible to choose whether or not to show
the Windows logo display at start-up and over-
write the boot log file. In addition, it is possible
to choose whether or not to minimize the delay
of the start-up menu at start-up.
<File System>
It is possible to increase the speed of the com-
puter by changing the disk cache size, etc.
Press this button to run the Defrag command.
Executing Defrag regularly prevents a reduc-
tion in the access speed to a drive.
NOTE
When the settings are changed, a display asks whether you would like to restart Windows.
Add check mark depending on your needs
If this box is checked, the time to enter the
hibernation mode and the time to resume
from the hibernation mode are shortened.
*
1
When Active Desktop cannot be used, it
cannot be changed (gray display).
*
2
When the controls of the channel bar of
Internet Explorer cannot be used, they
cannot be changed (gray display).
*
3
When “Welcome” of Internet Explorer 4.0
cannot be used, it is not displayed.
*
1
*
2
*
3