Filter
Top Products
20
1
Run the Setup Utility ( page 37)
3
4
2
Setting Timeout Function
Computing On The Road
5
Using and , select [Power]
6
7
Press F10 , then select [Yes]
Using and , select [Power Switch] and press Enter
Using and , select either [Suspend] or [Hibernation] and
press Enter
Using and , select either [Battery Operation] or [AC
Adapter] and press Enter
Using and , select the timeout setting and press Enter
8
Using and , select either [ECO mode Timeout] or [Hiber-
nation Timeout] (or [Suspend Timeout]) and press
CAUTION
When installed in a network environment.
Be sure to disable the suspend/hibernation timeout settings with the Setup Utility.
After resuming operation from the suspend or hibernation mode, the network
connection may be severed or the computer will not work properly.
When a device like a high-speed modem or ISDN terminal adapter is con-
nected to the serial port, etc.
There are times when high-speed communication is adversely affected if the
power management function is enabled. Please confirm that is displayed by
pressing to disable the power management function. After you have
finished using a communications device, you can enable the power management
function by pressing
Key operation and music playback.
When the power management function is running, you may feel that keyboard,
touch pad, or touchscreen (or mouse) operations are sluggish. Furthermore,
music may not be played back correctly when entering the ECO mode during
playback.
Fn + F8 .
When [ECO Mode Timeout] and [Suspend/Hibernation Timeout] are set to [Dis-
able] in the Setup Utility, does not work.
Even when a CD-ROM is running, the computer enters the ECO Mode with the
ECO Mode Timeout.
NOTE
Fn + F8
Fn + F8
Enter