Filter
Top Products
37
Setup Utility
Press F2 while [Press <F2> to enter SETUP] is displayed.
The Setup Utility will not run if F2 is not pressed soon after the computer
starts. In this case, you need to restart your computer.
If [Enter Password] is displayed, enter your password.
When entering the User Password, if the [Set User Password], [Set Supervisor
Password] and [User Password Protection] have been set, [Advanced] menu will
not be displayed on the main screen.
To display the [Advanced] menu:
1 Restart the computer and press F2 when [Press <F2> to enter SETUP] is
displayed.
2 When [Enter Password] is displayed, enter the Supervisor Password.
For more details, on-line help is available; press F1 .
Running the Setup Utility
Key Operations
F1 :To display the “General help” file.
Enter :To display sub-menu.
Esc :To display [Exit] menu.
:To move among the menus.
:To move among the items.
F5 F6 :To move among the values.
F10 :To save the settings and exit.
NOTE
NOTE
Closing the Setup Utility (Exit Menu) page 42
press F2
To run the Setup Utility, you
need to restart your computer.
Press <F2> to enter SETUP
Upon seeing
this message