Filter
Top Products
28
RAM module specifications
CAUTION
5
Snap the module into place by pushing down on it.
Installing the RAM module
Use a RAM module meeting the RAM module specifications below. If a module is
used that does not meet the specifications, there are cases in which data may
become unusable or the computer may not operate properly.
RAM modules are extremely sensitive to static electricity. There are cases where
static electricity generated by the human body has adversely affected such mod-
ules. In addition, it is easy to damage the RAM modules or internal components
of the computer. Therefore, when installing or removing a RAM module, handle
the module with extreme care.
Installing/Removing the RAM Module
2
144 pins, SO-DIMM, 3.3 V, SDRAM
Removing the RAM module
Open the left and right hooks.
Gently remove the RAM module from the slot.
RAM Module
4
Remove the battery pack ( page 25)
Put the cover back into place
Power off your computer ( "Starting Up/Shutting Down")
Do not shut down using the suspend or hibernation mode.
1
Slide in the module at an angle.
RAM Module
Hooks
Remove the cover
3
Remove the nine screws with a screwdriver, and remove the bottom
cover as shown in the illustration.