9-4
9.1.7.1. Wireless LAN Module
1. Remove the two Screws <N2> and two Cables(Gray and
Blue).
2. Pull out the Wireless LAN Module in the direction of
arrows.
9.1.7.2. BIOS PCB
1. Remove the two Screws <N2>, and remove the BIOS
PCB.
Screws <N2> : DFHE5122YA
Screws <N3> : DRHM0065ZA
9.1.8. Removing the Display unit
1. Remove the six Screws <N2>, and turn over the SW LED
MDC PCB.
2. Disconnect the two Cables from the Connectors (CN5
and CN35).
3. Remove the Speaker Holder L and four Cables (black,
white, blue and grey).
Remove the two Screws <N2>, and BIOS HIGH PCB.
4. Remove the four Screws <N4>, and remove the Display
unit.
Screws <N2> : DFHE5122YA
Screws <N4> : DRHM0093ZA
SW LED MDC PCB
<N2>
<N2>
<N2>
Cables
CN5 CN35
<N2>
Cable (black)
Cable (white) BIOS HIGH PCB
Speaker holder
<N4>
Display unit
<N4>