Filter
Top Products
9-17
9.2.6. Setting the SC RELAY PCB and HDD Hold Plate
1. Set the SC REALY PCB to the HDD Hold Plate, and fix it using two Screws <N2>. No.1, No.2
2. Fix the HDD Hold Plate to the MAIN HIGH PCB using the two Screws <N4>. No.3, No.4
3. Connect the FFC to the Connector(CN6503) and paste the Tape.
Screws <N2> : DFHE5122YA
Screws <N4> : DRHM0093ZA
<N2>
<N4>
CN6503
<N4>
SCRELAYPCB
HDDholdplate
FFC
Tape
:No.2
:No.1