Filter
Top Products
9-11
9.1.27. Removing the SERIAL PCB
1. Remove the two Screws <N1> and Hex Spacer.
2. Remove the SERIAL PCB.
Screw <N1> : DFHE5035ZB
9.1.28. Removing the MAIN HIGH PCB
1. Remove the two Screws <N1>, four Screws <N4> and
two Screws <N13>.
2. Disconnect the Battery Cable from the Connector(CN4).
3. Remove the MAIN HIGH PCB.
Screw <N1> : DFHE5035ZB
Screw <N4> : DRHM0093ZA
Screw <N13> : DXYN2+F12FNL
<N1>
<N1>
Hex spacer
SERIAL PCB
<N13>
<N4>
CN4
MAIN HIGH PCB
Battery
cable
<N4>
<N1>
<N4>