Filter
Top Products
9-5
9.1.9. Removing the LCD unit, Inverter
Ass’y and ANTENNA PWB L,R
1. Remove the two LCD Rubbers and five LCD Sheets.
2. Remove the five Screws <N4> and two Screws <N15>.
3. Release the twenty-one Hooks fixing the LCD Front to the
LCD unit, remove the LCD Front.
4. Remove the Screw <N12> and Tape, and remove the
LCD unit.
5. Disconnect the two Cables, and remove the Inverter
Ass’y.
6. Remove the eleven Tapes and two Screws <N2>, and
remove the ANTENNA PWB L, R.
Screws <N2> : DFHE5122YA
Screws <N4> : DRHM0093ZA
Screws <N12> : DXSB2+4FNLT
Screws <N15> : XQN17+BJ6FJ
9.1.10. Removing the Handle Ass'y
1. Remove the two Handle Sheets and two Screws <K172>,
remove the Handle Ass’y.
2. Remove the two Screws <K92-5>, and disassemble the
Handle Ass’y (Grip Upper, Grip Lower, Handle Base L,
Handle Base R, Handle Ring and Handle Pom) .
Screws <K92-5>: DRSB3+8FKLT
Screws <K172>: DRYN4+J12KLT
<N15>
<N15>
<N4>
<N4>
LCD
rubber
LCD
rubber
LCD screw
sheet
LCD screw
sheet
LCD screw
sheet
<N4>
<N4>
<N4>
Hooks
Hooks
Hooks
Hooks
Hooks
LCD front
Hooks
<N12>
Cable
Inverter
ass'y
Cable
<N2>
Tape
<N2>
LCD rear cover
ANTENNA
PWB R
LCD unit
ANTENNA
PWB L
Grip upper
Handle
ring
Handle
ring
Handle
pom
Handle
pom
Handle
ring
Grip
lower
Handle
base L
<K172>
<K92-5>
<K172>
Handle
base R
Handle
ring
Handle
sheet
Handle
sheet