9-3 5
LCD ASS'Y
Note: Paster shall be firmly stuck and
Note: Paster shall be firmly stuck and
does not float.
does not float.
SHEET
There are total 12 gaskets indicated by yellow
arrows which must be installed surely.
Refer to the specification pictures on the left.
OK
OK
NG
NG
Note:
Do not exceed the
edge of the metal
frame
LCD ASS'Y
INV CASE UPPER
INV CASE LOWER
INVERTER
INVERTER CABLE
SCREW
CAUTION LABEL
SHEET
TA PE
INVERTER
T
orque of tightening screw :0.2 0.02N m( 2.0 0.2kgf cm)
CAUTION
S1:Insulation S2:Bitten S3:Sharp Edge
S4:Part No. Check S5:Other
S1
S4
Safety Critical Components
Avoid running over the
electrical parts.
Pasting range
Paste sheets firmly:2-3kg/cm
2
Using JIG
Paste along this line.
Insert the pik cable of the LCD body from the upper
direction. After inserted, confirm the assembly and
mark it.
Paste the sheet.
Cable shall be near the wall.
More than 10mm
Direction of the word