Filter
Top Products
Password Communications
106
To use Password Transmission, you can select PASSWORD-XMT “OFF” or “ON” for each Transmission by
following the procedure below.
Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL" mode.
Using Password Transmission
1a
Place original(s) face up on the ADF.
or
ENTER STATION(S)
THEN PRESS START 00%
1b
Place a book or an original face down on the Platen Glass.
Press to select the original size.
2
SELECT MODE (1-5)
ENTER NO. OR
∨∧
3
PASSWD-XMT=OFF
1:OFF 2:ON
4
for “OFF” (password is not checked)
or
for “ON” (password is checked)
PASSWD-XMT=OFF
1:OFF 2:ON
or
PASSWD-XMT=ON
1:OFF 2:ON
5
ENTER STATION(S)
THEN PRESS START
6
Dial by any combination of the following methods:
• One-Touch Dialling
• Abbreviated Dialling
• Manual Number Dialling, press after each
station is entered
(Up to 30 stations)
• Directory Search Dialling, press after each
station is entered
(For details, see page 39 to 43.)
Ex:
<01>(Station name)
5551234
1
2
ORIGINAL SIZE
.
SET
SET
01