Filter
Top Products
Customizing Your Machine
30
Fax Parameter Table
022 SUBSTITUTE RCV 1 Invalid Selecting whether the machine receives to memory when
the recording paper runs out, toner runs out or the
recording paper is jammed.
2Valid
024 PRINT REDUCTION 1 Fixed Selecting print reduction mode.
Fixed :Reduce received document according to setting of
Parameter No. 25.
Auto : Reduce received document according to the length
of received documents.
2Auto
025 REDUCTION RATIO 70 70% Selecting the fixed print reduction ratio from 70% to 100%.
This parameter functions only when the fixed print
reduction is selected on Fax Parameter No. 24.
---- ----
100 100%
026 POLLING PASSWORD (----) Setting a 4-digit password for secured polling. (See page
69)
027 POLLED FILE SAVE 1 Invalid Selecting whether the machine retains the polled
document in memory even after the document is polled
once.
2Valid
028 STAMP AT MEM. XMT 1 Invalid Selecting whether the machine stamps the original
documents when storing the documents into memory.
(Depending on the Stamp setting on the Control Panel)
2Valid
030 DRD SERVICE 1 Invalid Selecting whether or not the machine is available "DRD
Service". If this parameter is set to "Valid", your machine
detects the specified ring pattern only to receive a
document automatically.
2Valid
031 INCOMPLETE FILE
SAVE
1 Invalid Selecting whether the machine retains the document in
memory if the document is not successfully transmitted.
2Valid
033 XMT REDUCTION 1 Invalid Selecting whether the machine performs reduction when
the transmitting original is wider than the recording paper
used at the receiving machine.
2Valid
035 DAYLIGHT TIME 1 Invalid Selecting whether the clock adjusts for Daylight Saving
Time automatically. The built-in clock will advance 1 hour
at 1:00 am on the last Sunday in March and go back 1
hour at 1:00 am on the last Sunday in October.
2Valid
037 RCV TO MEMORY (----) Enter a 4-digit password used to print out the received
document in memory by using F8-5 (RCV TO MEMORY).
When F8-5 is set to On, this parameter will not be shown
on the LCD display. (See page 88)
038 ACCESS CODE (----) Enter a 4-digit Access Code to secure the machine from
unauthorized use. (See page 86)
039 PIN CODE ACCESS 1 None Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code. (See page 92)
2Suffix
3Prefix
042 CONF. POLLED FILE
SAVE
1 Invalid Selecting whether the machine saves the confidential
polled file even after the file is polled once.
2Valid
043 PASSWORD-XMT 1 Off Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the
receiving station when transmitting. (See page 104)
2On
044 PASSWORD-RCV 1 Off Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
transmitting station when receiving. (See page 105)
2On
No. Parameter
Setting
Number
Setting Comments