Filter
Top Products
Control Panel
13
Getting to Know
Your Machine
.
One-Touch Keys (01-52)
Used for One-Touch Dialling.
(See page 41 and 48)
Used to switch the
machine into energy
saving mode.
For more details, see
page 23 of the Operating
Instructions (For Copier.)
Used to start or
select the function
and subfunctions.
These functions are
explained in detail
on page 10.
Use this button when
resetting all the
previously set functions.
Use this button
when correcting
entered numbers
or characters.
Press this button when
you want to stop
communication,
registration operation, or
audible tone.
Press this button to start
transmitting or receiving a
fax.
Used to enter a pause when entering or dialling
a telephone number, or to redial the last
dialled number.
Used to separate the Sub-Address from the telephone
number when dialling, or to access some features of
your PBX.
Used to start Abbreviated Dialling.
(See page 42 and 49)
Used to start On-Hook Dialling or entering the space
between the characters. (See page 53)
Used to set operations.
Keypad
Used for manual number dialling,
entering phone numbers, inputting
sentences, characters and words,
and numerical entries.
Key
Used to temporarily change the
dialling mode to Tone when Pulse
mode is set.
Used to turn the verification
stamp ON or OFF.
(See page 35)
M1/ STAMP
Used to select either memory
or direct communication.
(See page 37 to 50)
M2/ MEM XMT
Program Keys (P1-P8)