Filter
Top Products
33
Basic Operations
Basic Operations
Loading Documents
Place a book or an original face down on the Platen Glass, then press to select the
original size. The message "ANOTHER ORIGINAL?" is shown
on the LCD display when is pressed and the scanning is completed.
• If you wish to store another page, press and place another original, then press .
• If is pressed, the machine starts to dial the telephone number.
NOTE
1. When an oversized original is sent to another machine, sometimes, it is reduced in accordance
with the other party's recording paper size.
Ex:
How to Load Documents
1. On the ADF / Inverting ADF 2. On the Platen Glass
• Place the original(s) Face Up on the ADF until the
leading edge placed into the machine stops.
• Place a book or an original Face Down on the
Platen Glass, aligning it with the arrow mark on the
original size guides.
Sending Non-Standard Size Documents
When transmitting non-standard size document(s),
the machine may perform Rotate Transmission
automatically and not transmit the portion of the
document that exceeds the standard size ("P"
portion). (See Note 1)
Flatbed Scanning
Original Size
Guide
Face Up
Original Size
Guide
Face Down
P
Rotation XMT
Direction
The part which
protrudes from the
Fixed size is not sent.
ORIGINAL SIZE
START
1:YES
START
2:NO
A3 size A4 size