Filter
Top Products
34
Basic Transmission Settings
You can temporarily change the transmission settings either before or after you place the document on the
ADF.
These settings are as follows
After your document(s) have been sent, your machine will automatically return to the preset settings.
Your machine is preset to Normal contrast. If you wish to send a document with lighter contrast, change the
setting to Lighter. If you wish to send a document with darker contrast, change the setting to Darker.
Press or :
Your machine is preset to Standard resolution, which is suitable for most documents.
Use Fine or Super Fine for detailed documents.
Press to:
NOTE
1. To change the preset Contrast position, change the setting of Fax Parameter No. 01.
(See page 29)
2. To change the preset Resolution position, change the setting of Fax Parameter No. 02.
(See page 29)
3. If you send a photographic original with gray tones, your machine is automatically set the
Resolution to FINE or S-FINE (406 x 391 dpi) and the Original setting to Text/Photo or Photo.
The reproduction of the received document will be determined by the capability of the remote
station.
General Description
• Contrast
• Resolution
• Original (Text/Photo)
•Stamp
• Communication Journal
• Password-XMT
Contrast
Resolution
LIGHTER
DARKER
RESOLUTION
for standard originals
for detailed originals
for finer detailed originals