Filter
Top Products
60
Receiving Documents
Your machine is provided with both automatic and manual reception modes. The selection of either
reception mode is made with Fax Parameter No. 017 (RECEIVE MODE).
Your machine will receive documents automatically if the Fax Parameter No. 017 (RECEIVE MODE) is set
to "Auto". (See page 29)
You may wish to receive documents manually if you use the telephone line in your office primarily as a
personal telephone and occasionally for your facsimile machine.
To receive documents manually, change the Fax Parameter No. 017 (RECEIVE MODE) to "Manual" (See
page 29) and the following message will be shown on the display.
NOV-12-2000 15:00
MANUAL RCV 00%
NOTE
1. Your machine requires an optional fax handset or an external telephone connected to the TEL
jack on the left rear cover of the machine.
2. If you receive a document with Super Fine resolution (406 pels/inch x 391 lines/inch), it might
be divided into multiple pages with no reduction.
General Description
Automatic Reception
Manual Reception
To receive documents manually
1
When the telephone rings, lift the handset. (See Note 1)
If you hear a beep, the sound tells you that someone
wants to send a document.
* PHONE OFF HOOK *
2
Remove any documents from the ADF.
3
Your machine starts receiving the document.
ON LINE * RCV *
4
Hang up the telephone.