Filter
Top Products
Sending Documents
41
Memory Transmission
Basic Operations
One-Touch Dialling
One-Touch Dialling allows you to dial a full telephone number by pressing a single key. To set up the One-
Touch keys, see page 23.
Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL" mode.
NOTE
1. This feature is called "Quick Memory Transmission". If you wish to store All the document(s)
into memory first before transmitting, change the Fax Parameter No. 082 (QUICK MEMORY
XMT) to " Invalid". (See page 31)
1a
Place original(s) face up on the ADF.
or
ENTER STATION(S)
THEN PRESS START 00%
1b
Place a book or an original face down on the Platen Glass.
Press to select the original size.
2
Make sure that the MEMORY lamp is on.
If not, press to set "On".
3
Press a One-Touch key.
Ex:
<01>(Station name)
5551234
4
The document(s) begin to store into memory with a file
number.
Then starts dialling the telephone number immediately
after storing the first page. (See Note 1)
The remaining page(s) continue to store into memory.
* STORE * NO.002
PAGES=001 05%
* DIALLING * NO.002
(Station name)
1
2
ORIGINAL SIZE
M2/ MEM XMT
M2/MEM XMT
01