Filter
Top Products
2. Initial Preparation
Setting your facsimile telephone number
14
1
Press (MENU).
2
Press
K
, then
@C
.
3
Press
(START/SET)
.
4
Enter your facsimile telephone number up to
20 digits.
¡k
button inserts a space and
j
button a
“+”.
5
Press
(START/SET)
.
6
Press
(MENU)
.
NO.=
YOUR TEL NO.
SYSTEM SET UP
» Ringer volume: 3 levels (high/low/off) are available.
Press (VOLUME) (Z/Y) while the unit is in an idle status.
To turn the ringer off:
1. Press Z repeatedly.
¡The following messages will be shown alternately.
» 2. Press (START/SET).
» While the ringer volume is set to off:
The display will show the following message and the unit will
not ring when receiving a call.
» Handset volume: 3 levels (high/middle/low) are available.
Press (VOLUME) (Z/Y) when using the handset.
» Speaker volume: 8 levels (high to low) are available.
Press (VOLUME) (Z/Y) when using the speakerphone.
» Answering device volume (KX-F1100AL only):
9 levels (high to off) are available.
Press (VOLUME) (Z/Y) when listening to the recorded
messages.
RINGER OFF
YES: PRESS SETRINGER OFF= OK?
Note:
Logo, telephone number, date, time and page
number will be printed outside of the document you
send. To change the print position, see page 45.
Adjusting volumes
(START/SET)
(MENU)
(START/SET)Dial keypad
(VOLUME)