Filter
Top Products
48
8. Advanced Operations
Printed documentOriginal document
(1st page)
(2nd page)
Use this feature if you wish to save film and recording paper when receiving two or more faxed pages. When
this feature is set, the unit will reduce documents to half their length and print out two pages of documents on
one page. A boundary will be printed out between the documents.
Important:
This feature will not work when the other party sends a document in fine resolution or other nonstandard
resolutions.
Sample of paper save print:
To activate this feature
1
Press (FILM/PAPER\SAVE).
¡The following messages will be alternately
displayed.
2
Press (START/SET).
¡The arrow mark will be displayed.
To deactivate this feature
1
Press (FILM/PAPER\SAVE).
¡The following messages will be alternately
displayed.
2
Press (START/SET).
YES: PRESS SET
PAPER SAVE=OFF?
FILM/PAPER SAVE
YES: PRESS SET
PAPER SAVE=ON?
Note:
¡When a reduced document is longer than the
recording paper, it will be printed on two pages.
The continuation will be printed on next page and
there may be wasted space. In this case, paper
and film will not be saved for the wasted space.
¡When documents are longer than legal size
(356 mm in length), the unit will not print the next
page of the document on the same page.
¡Paper and film will not be saved for one page
document and the last page of odd numbered
documents.
Film/Paper save reception
ABCDEF
ABCDEF
abcdef
abcdef
ABCDEF
ABCDEF
abcdef
abcdef
Boundary
(START/SET)
(FILM/PAPER\SAVE)